暫無描述

RtcEngine.native.d.ts 32KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436437438439440441442443444445446447448449450451452453454455456457458459460461462463464465466467468469470471472473474475476477478479480481482483484485486487488489490491492493494495496497498499500501502503504505506507508509510511512513514515516517518519520521522523524525526527528529530531532533534535536537538539540541542543544545546547548549550551552553554555556557558559560561562563564565566567568569570571572573574575576577578579580581582583584585586587588589590591592593594595596597598599600601602603604605606607608609610611612613614615616617618619620621622623624625626627628629630631632633634635636637638639640641642643644645646647648649650651652653654655656657658659660661662663664665666667668669670671672673674675676677678679680681682683684685686687688689690691692693694695696697698699700701702703704705706707708709710711712713714715716717718719720721722723724725726727728729730731732733734735736737738739740741742743744745746747748749750751752753754755756757758759760761762763764765766767768769770771772773774775776777778779780781782783784785786787788789790791792793794795796797798799800801802803804805806807808809810811812813814815816817818819820821822823824825826827828829830831832833834835836837838839840841842843844845846847848849850851852853854855856857858859860861862863864865866867868869870871872873874875876877878879880881882883884885886887888889890891892893894895896897898899900901902903904905906907908909910911912913914915916917918919920921922923924925926927928929930931932933934935936937938939940941942943944945946947948949950951952953954955956957958959960961962963964965966967968969970971
  1. import { Option, Callback, VideoOption, AudioMixingOption, DataStreamOption, PlayEffectOption, AudioRecordingOption, AudioFrameOption, MixedAudioFrameOption, ImageOption, VideoStreamOption, DefaultVideoStreamOption, InjectStreamOption, RemoveInjectStreamOption, PublishStreamOption, RemovePublishStreamOption, LiveTranscodingOption, PositionOption, BeautyOption, LastmileProbeConfig, CameraCapturerConfiguration } from "./types";
  2. /**
  3. * RtcEngine is the javascript object for control agora native sdk through react native bridge.
  4. *
  5. * You can use the RtcEngine methods to create {@link init}
  6. *
  7. * Other methods of the RtcEngine object serve for agora native sdk and set up error logging.
  8. */
  9. declare class RtcEngine {
  10. private static eventTypes;
  11. /**
  12. * Creates a RtcEngine Object internal.
  13. *
  14. * This method creates and start event observer. You should call this method once.
  15. * @example `RtcEngine.init(option)`
  16. * @param options Defines the property of the client, see {@link Option} for details.
  17. */
  18. static init(options: Option): void;
  19. /**
  20. * join specified channel
  21. *
  22. * This method joins and begin rendering the video stream. when join succeeds.
  23. * Otherwise, it will invoke error by the event
  24. * @param channelName
  25. * @param uid
  26. * @param token
  27. * @param info
  28. */
  29. static joinChannel(channelName: string, uid?: number, token?: string, info?: Object): void;
  30. /**
  31. * add event listener
  32. *
  33. * This method subscribes specified eventType and run listener. You should call this method at first.
  34. * @param eventType
  35. * @param listener
  36. */
  37. static on(eventType: string, listener: (...args: any[]) => any): void;
  38. /**
  39. * remove event listeners
  40. *
  41. * This method unsubscribes specified eventType related all listeners. You should call this method when you want to unsubscribe some eventType.
  42. * @param eventType
  43. */
  44. static off(eventType: string): void;
  45. /**
  46. * remove all events listeners
  47. *
  48. * This method unsubscribes all eventTypes related listeners.
  49. *
  50. * @param token
  51. */
  52. static removeAllListeners(): void;
  53. /**
  54. * renew token
  55. *
  56. * This method renews a new token.
  57. * @param token
  58. */
  59. static renewToken(token: string): any;
  60. /**
  61. * enable websdk interoperability
  62. *
  63. * This method used to enable websdk interoperability, so that it can connect with agora websdk apps.
  64. *
  65. * @param enabled
  66. * @returns Promise<{success, value}>
  67. */
  68. static enableWebSdkInteroperability(enabled: boolean): Promise<any>;
  69. /**
  70. * get agora native sdk connection state
  71. *
  72. * This method gets agora native sdk connection state
  73. * @returns Promise<{success: true, state: (connection state)}>
  74. */
  75. static getConnectionState(): any;
  76. /**
  77. * change the client role
  78. *
  79. * This method changes the client of role.
  80. * @param role (audience: 0, host: 1)
  81. */
  82. static setClientRole(role: number): void;
  83. /**
  84. * leave channel
  85. *
  86. * This method leaves the joined channel, then your video view will not render ever.
  87. * You should call it, when you dont need render video stream.
  88. *
  89. * @returns Promise<{success, value}>
  90. */
  91. static leaveChannel(): Promise<any>;
  92. /**
  93. * destroy
  94. *
  95. * This method stops event subscribe and destroy the RtcEngine instance's.
  96. * You should call it, when you want to destroy the engine.
  97. *
  98. * @returns Promise<{success, value}>
  99. */
  100. static destroy(): Promise<any>;
  101. /**
  102. * show local video
  103. *
  104. * This method calls native sdk render canvas for local video.
  105. * @param options {@link VideoOption}
  106. */
  107. static setupLocalVideo(options: VideoOption): void;
  108. /**
  109. * show remote video
  110. *
  111. * This method calls native sdk render canvas for remote video.
  112. * @param options {@link VideoOption}
  113. */
  114. static setupRemoteVideo(options: VideoOption): void;
  115. /**
  116. * set local video render mode
  117. *
  118. * This method calls native sdk render mode for local video.
  119. * @param mode
  120. */
  121. static setLocalRenderMode(mode: number): void;
  122. /**
  123. * set the specified remote video render mode
  124. *
  125. * This method calls native sdk render mode for the specified remote video.
  126. *
  127. * @param uid
  128. * @param mode
  129. */
  130. static setRemoteRenderMode(uid: number, mode: number): void;
  131. /**
  132. * start video preview
  133. *
  134. * This method start video preview for video.
  135. */
  136. static startPreview(): void;
  137. /**
  138. * stop video preview
  139. *
  140. * This method stops video preview for video.
  141. */
  142. static stopPreview(): void;
  143. /**
  144. * set enable speaker phone
  145. *
  146. * This method set the speaker phone enable or disable by pass boolean parameter.
  147. * @param enabled
  148. */
  149. static setEnableSpeakerphone(enabled: boolean): void;
  150. /**
  151. * set default audio speaker
  152. *
  153. * This method set the default audio speaker enable or disable by pass boolean parameter.
  154. * @param enabled
  155. */
  156. static setDefaultAudioRouteToSpeakerphone(enabled: boolean): void;
  157. /**
  158. * set default mute all remote audio streams
  159. *
  160. * This method set default mute all remote audio streams enable or not by pass boolean parameter.
  161. * @param enabled
  162. */
  163. static setDefaultMuteAllRemoteAudioStreams(enabled: boolean): void;
  164. /**
  165. * enable video
  166. *
  167. * This method enables video.
  168. */
  169. static enableVideo(): void;
  170. /**
  171. * disable video
  172. *
  173. * This method disables video.
  174. */
  175. static disableVideo(): void;
  176. /**
  177. * enable local video
  178. *
  179. * This method enables the local video by the boolean parameter.
  180. * @param enabled
  181. */
  182. static enableLocalVideo(enabled: boolean): void;
  183. /**
  184. * mute local video stream
  185. *
  186. * This method mutes video stream by the boolean parameter.
  187. * @param muted
  188. */
  189. static muteLocalVideoStream(muted: boolean): void;
  190. /**
  191. * mute all remote video streams
  192. *
  193. * This method mutes all remote streams by the boolean parameter.
  194. * @param muted
  195. */
  196. static muteAllRemoteVideoStreams(muted: boolean): void;
  197. /**
  198. * mute specified remote video stream.
  199. *
  200. * This method mutes remote video stream by the number of uid and boolean parameter.
  201. * @param uid
  202. * @param muted
  203. */
  204. static muteRemoteVideoStream(uid: number, muted: boolean): void;
  205. /**
  206. * set default mute all remote video stream
  207. *
  208. * This method mutes all remote video stream default by the boolean parameter.
  209. * @param muted
  210. */
  211. static setDefaultMuteAllRemoteVideoStreams(muted: boolean): void;
  212. /**
  213. * enable audio
  214. *
  215. * This method enables audio
  216. */
  217. static enableAudio(): void;
  218. /**
  219. * disable audio
  220. *
  221. * This method disables audio
  222. */
  223. static disableAudio(): void;
  224. /**
  225. * enable local audio
  226. *
  227. * This method enables local audio by the boolean parameter.
  228. * @param enabled
  229. */
  230. static enableLocalAudio(enabled: boolean): void;
  231. /**
  232. * mute local audio stream
  233. *
  234. * This method mutes the local audio stream by muted.
  235. * @param muted
  236. */
  237. static disableLocalAudio(muted: boolean): void;
  238. /**
  239. * mute all remote audio streams
  240. *
  241. * This method mutes all remote audio streams by muted
  242. */
  243. static muteAllRemoteAudioStreams(muted: boolean): void;
  244. /**
  245. * mute specified remote audio stream by muted
  246. *
  247. * This method mutes specified remote audio stream by number uid and boolean muted.
  248. * @param uid
  249. * @param muted
  250. */
  251. static muteRemoteAudioStream(uid: number, muted: boolean): void;
  252. /**
  253. * adjust recording signal volume
  254. *
  255. * This method adjusts recording your signal by volume.
  256. * @param volume
  257. */
  258. static adjustRecordingSignalVolume(volume: number): void;
  259. /**
  260. * adjust playback signal volume
  261. *
  262. * This method adjusts playback signal by volume.
  263. * @param volume
  264. */
  265. static adjustPlaybackSignalVolume(volume: number): void;
  266. /**
  267. * enable audio volume indication
  268. *
  269. * This method enables audio volume by interval and smooth
  270. * @param interval
  271. * @param smooth
  272. */
  273. static enableAudioVolumeIndication(interval: number, smooth: number): void;
  274. /**
  275. * create data stream
  276. *
  277. * This method creates data stream with options
  278. *
  279. * @param options {@link DataStreamOption}
  280. */
  281. static createDataStream(options: DataStreamOption): any;
  282. /**
  283. * check for mobile phone speaker enabled
  284. *
  285. * This method checks the phone speaker is enabled
  286. * @param callback
  287. */
  288. static methodisSpeakerphoneEnabled(callback: Callback<any>): void;
  289. /**
  290. * enable in-ear monitor
  291. *
  292. * This method enables in-ear monitoring by boolean parameter enabled
  293. *
  294. * @param enabled
  295. */
  296. static enableInEarMonitoring(enabled: boolean): void;
  297. /**
  298. * set in-ear monitoring volume
  299. *
  300. * This method sets the in-ear-monitoring volume by number parameter volume
  301. *
  302. * @param volume
  303. */
  304. static setInEarMonitoringVolume(volume: number): void;
  305. /**
  306. * set local voice pitch
  307. *
  308. * This method sets the local voice pitch by float parameter pitch
  309. *
  310. * @param pitch
  311. */
  312. static setLocalVoicePitch(pitch: number): void;
  313. /**
  314. * set local voice equalization
  315. *
  316. * This method set local video equalization of band frequency by enum band number and number of gain
  317. *
  318. * @param band
  319. * @param gain
  320. */
  321. static setLocalVoiceEqualization(band: number, gain: number): void;
  322. /**
  323. * set local voice reverb
  324. *
  325. * This method sets local voice by reverb and value
  326. * @param reverb
  327. * @param value
  328. */
  329. static setLocalVoiceReverb(reverb: number, value: number): void;
  330. /**
  331. * start audio mixing
  332. *
  333. * This method will start audio mixing by option config
  334. *
  335. * @param options {@link AudioMixingOption}
  336. */
  337. static startAudioMixing(options: AudioMixingOption): void;
  338. /**
  339. * stop audio mixing
  340. *
  341. * This methods stops for audio mixing.
  342. */
  343. static stopAudioMixing(): void;
  344. /**
  345. * pause audio mixing
  346. *
  347. * This method pauses for audio mixing.
  348. */
  349. static pauseAudioMixing(): void;
  350. /**
  351. * resume audio mixing
  352. *
  353. * This method resumes for audio mixing.
  354. */
  355. static resumeAudioMixing(): void;
  356. /**
  357. * adjust audio mixing volume
  358. *
  359. * This method adjusts audio mixing volume by the volume number parameter
  360. * @param volume
  361. */
  362. static adjustAudioMixingVolume(volume: number): void;
  363. /**
  364. * adjust audio mixing playout volume
  365. *
  366. * This method adjusts audio mixing playout by the volume parameter
  367. * @param volume
  368. */
  369. static adjustAudioMixingPlayoutVolume(volume: number): void;
  370. /**
  371. * adjust audio mixing publish volume
  372. *
  373. * This method adjusts audio mixing publish by the volume paraemter
  374. * @param volume
  375. */
  376. static adjustAudioMixingPublishVolume(volume: number): void;
  377. /**
  378. * get audio mixing duration
  379. *
  380. * This method gets the audio mixing duration
  381. * @returns Promise<{success, value}>
  382. */
  383. static getAudioMixingDuration(): Promise<any>;
  384. /**
  385. * get audio mixing current position
  386. *
  387. * This method gets audio mixing current position value.
  388. * @returns Promise<{success, value}>
  389. */
  390. static getAudioMixingCurrentPosition(): Promise<any>;
  391. /**
  392. * set audio mixing position
  393. *
  394. * This method sets audio mixing position by the parameter pos
  395. * @param pos
  396. */
  397. static setAudioMixingPosition(pos: number): Promise<any>;
  398. /**
  399. * get effects of volume
  400. *
  401. * This methods get audio mixing effects volume value.
  402. * @returns Promise<{success, value}>
  403. */
  404. static getEffectsVolume(): Promise<any>;
  405. /**
  406. * set effects volume
  407. *
  408. * This methods set audio mixing effects volume by float parameter.
  409. * @param volume
  410. * @returns Promise<{success, value}>
  411. */
  412. static setEffectsVolume(volume: number): Promise<any>;
  413. /**
  414. * set volume for playing effects.
  415. *
  416. * This methods set for playing audio mixing effects
  417. * @returns Promise<{success, value}>
  418. */
  419. static setVolumeOfEffect(volume: number): Promise<any>;
  420. /**
  421. * play specified effect for audio mixing
  422. *
  423. * This methos plays the specified effect of audio mixing file by option config.
  424. * @param options {@link PlayEffectOption}
  425. * @returns Promise<{success, value}>
  426. */
  427. static playEffect(options: PlayEffectOption): Promise<any>;
  428. /**
  429. * stop play effect for audio mixing
  430. *
  431. * This methods stops the specified effect for audio mixing file by soundid.
  432. * @param sounid
  433. * @returns Promise<{success, value}>
  434. */
  435. static stopEffect(soundId: number): Promise<any>;
  436. /**
  437. * stop play all for effect audio mixing.
  438. *
  439. * This methods stops all effect audio mixing.
  440. * @returns Promise<{success, value}>
  441. */
  442. static stopAllEffects(): Promise<any>;
  443. /**
  444. * preload effect for audio mixing file.
  445. *
  446. * This methods preloads the specified audio mixing file to memory by the soundid
  447. * @param soundid
  448. * @param filepath
  449. * @returns Promise<{success, value}>
  450. */
  451. static preloadEffect(soundId: number, filepath: string): Promise<any>;
  452. /**
  453. * unload effect
  454. *
  455. * This methods unload the already loaded audio mixing file from memory by the soundid.
  456. * @param soundid
  457. * @returns Promise<{success, value}>
  458. */
  459. static unloadEffect(soundId: number): Promise<any>;
  460. /**
  461. * pause the specified effect for audio mixing by soundid
  462. *
  463. * This method pauses the specified effect for audio mixing by soundid.
  464. * @param soundid
  465. * @returns Promise<{success, value}>
  466. */
  467. static pauseEffect(soundId: number): Promise<any>;
  468. /**
  469. * pause all effects for audio mixing
  470. *
  471. * This method pause all effects for audio mixing.
  472. * @param soundid
  473. * @returns Promise<{success, value}>
  474. */
  475. static pauseAllEffects(): Promise<any>;
  476. /**
  477. * resume audio mixing effect by the specified soundid
  478. *
  479. * This method resumes audio mixing effect by the specified soundid
  480. * @param soundid
  481. * @returns Promise<{success, value}>
  482. */
  483. static resumeEffect(soundId: number): Promise<any>;
  484. /**
  485. * resume all audio mixing effects.
  486. *
  487. * This method resumes all audio mixing effects.
  488. * @returns Promise<{success, value}>
  489. */
  490. static resumeAllEffects(): Promise<any>;
  491. /**
  492. * start audio recording by quality
  493. *
  494. * This method start audio recording by quality config
  495. * @param options {@link AudioRecordingOption}
  496. * @returns Promise<{success, value}>
  497. */
  498. static startAudioRecording(options: AudioRecordingOption): Promise<any>;
  499. /**
  500. * stop audio recording
  501. *
  502. * This method stops audio recording.
  503. * @returns Promise<{success, value}>
  504. */
  505. static stopAudioRecording(): Promise<any>;
  506. /**
  507. * set audio session operation restriction
  508. *
  509. * The SDK and the app can both configure the audio session by default. The app may occasionally use other apps or third-party components to manipulate the audio session and restrict the SDK from doing so. This method allows the app to restrict the SDK’s manipulation of the audio session.
  510. * You can call this method at any time to return the control of the audio sessions to the SDK.
  511. * This method restricts the SDK’s manipulation of the audio session. Any operation to the audio session relies solely on the app, other apps, or third-party components.
  512. * @notice iOS support only
  513. */
  514. static setAudioSessionOperationRestriction(): void;
  515. /**
  516. * @deprecated
  517. * start echo test
  518. *
  519. * This method launches an audio call test to determine whether the audio devices (for example, headset and speaker) and the network connection are working properly.
  520. * @returns Promise<{success, value}>
  521. */
  522. /**
  523. * stop echo test
  524. *
  525. * This method stop launched an audio call test.
  526. * @returns Promise<{success, value}>
  527. */
  528. static stopEchoTest(): Promise<any>;
  529. /**
  530. * enable lastmile test
  531. *
  532. * This method enables the network connection qualit test.
  533. *
  534. * @returns Promise<{success, value}>
  535. */
  536. static enableLastmileTest(): Promise<any>;
  537. /**
  538. * disable lastmile test
  539. *
  540. * This method disable the network connection qualit test.
  541. *
  542. * @returns Promise<{success, value}>
  543. */
  544. static disableLastmileTest(): Promise<any>;
  545. /**
  546. * set recording audio frame parameters
  547. *
  548. * This method Sets the audio recording format for the audioFrame callback.
  549. *
  550. * @param options {@link RecordingAudioFrameOption}
  551. * @returns Promise<{success, value}>
  552. */
  553. static setRecordingAudioFrameParameters(options: AudioFrameOption): Promise<any>;
  554. /**
  555. * set playback audio frame parameters
  556. *
  557. * This method Sets the audio frame format for the playbackFrame callback.
  558. *
  559. * @param options {@link AudioFrameOption}
  560. * @returns Promise<{success, value}>
  561. */
  562. static setPlaybackAudioFrameParameters(options: AudioFrameOption): Promise<any>;
  563. /**
  564. * set mixed audio frame parameters
  565. *
  566. * This method Sets the audio frame format for the mixedAudioFrame callback.
  567. *
  568. * @param options {@link MixedAudioFrameOption}
  569. * @returns Promise<{success, value}>
  570. */
  571. static setMixedAudioFrameParameters(options: MixedAudioFrameOption): Promise<any>;
  572. /**
  573. * add video watermark
  574. *
  575. * This method adds video watermark to the local video.
  576. *
  577. * @param options {@link ImageOption}
  578. * @returns Promise<{success, value}>
  579. */
  580. static addVideoWatermark(options: ImageOption): Promise<any>;
  581. /**
  582. * clear video watermarks
  583. *
  584. * This method removes the watermark image from the video stream added by addVideoWatermark.
  585. *
  586. * @returns Promise<{success, value}>
  587. */
  588. static removclearVideoWatermarkse(): Promise<any>;
  589. /**
  590. * set local publish fallback
  591. *
  592. * This method sets the fallback option for the locally published video stream based on the network conditions.
  593. *
  594. * @param option {0, 1, 2} [more details](https://docs.agora.io/en/Video/API%20Reference/java/classio_1_1agora_1_1rtc_1_1_constants.html#a3e453c93766e783a7e5eca05b1776238)
  595. * @returns Promise<{success, value}>
  596. */
  597. static setLocalPublishFallbackOption(option: number): Promise<any>;
  598. /**
  599. * set remote publish fallback
  600. *
  601. * This method sets the fallback option for the remotely subscribed video stream based on the network conditions.
  602. *
  603. * @param option {0, 1, 2} [more details](https://docs.agora.io/en/Video/API%20Reference/java/classio_1_1agora_1_1rtc_1_1_constants.html#a3e453c93766e783a7e5eca05b1776238)
  604. * @returns Promise<{success, value}>
  605. */
  606. static setRemoteSubscribeFallbackOption(option: number): Promise<any>;
  607. /**
  608. * enable dual stream mode
  609. *
  610. * This method enables the dual stream by parameter mode.
  611. *
  612. * @param enabled
  613. * @returns Promise<{success, value}>
  614. */
  615. static enableDualStreamMode(enabled: boolean): Promise<any>;
  616. /**
  617. * set remote video stream type
  618. *
  619. * This method sets the remote video stream type by uid and streamType.
  620. *
  621. * @param options {@link VideoStreamOption}
  622. * @returns Promise<{success, value}>
  623. */
  624. static setRemoteVideoStreamType(options: VideoStreamOption): Promise<any>;
  625. /**
  626. * set remote default video stream type
  627. *
  628. * This method sets the default video stream type.
  629. *
  630. * @param options {@link DefaultVideoStreamOption}
  631. * @returns Promise<{success, value}>
  632. */
  633. static setRemoteDefaultVideoStreamType(options: DefaultVideoStreamOption): Promise<any>;
  634. /**
  635. * add inject stream url
  636. *
  637. * This method injects an online media stream to a live broadcast.
  638. *
  639. * @param options {@link InjectStreamOption}
  640. * @returns Promise<{success, value}>
  641. */
  642. static addInjectStreamUrl(options: InjectStreamOption): Promise<any>;
  643. /**
  644. * remove inject stream url
  645. *
  646. * This method removes stream by addInjectsStreamUrl.
  647. *
  648. * @param options {@link RemoveInjectStreamOption}
  649. * @returns Promise<{success, value}>
  650. */
  651. static removeInjectStreamUrl(options: RemoveInjectStreamOption): Promise<any>;
  652. /**
  653. * @deprecated
  654. * set video quality
  655. *
  656. * This method sets the preferences for the video quality. (Live broadcast only).
  657. *
  658. * @param quality boolean
  659. * @returns Promise<{success, value}>
  660. */
  661. /**
  662. * set local video mirror mode
  663. *
  664. * This method sets local video mirror mode
  665. *
  666. * @param mode
  667. * @returns Promise<{success, value}>
  668. */
  669. static setLocalVideoMirrorMode(mode: number): Promise<any>;
  670. /**
  671. * switch camera
  672. *
  673. * This method switches camera between front and rear.
  674. *
  675. * @returns Promise<{success, value}>
  676. */
  677. static switchCamera(): Promise<any>;
  678. /**
  679. * is camera zoom supported
  680. *
  681. * This method checks whether the camera zoom function is supported.
  682. *
  683. * @returns Promise<{success, value}>
  684. */
  685. static isCameraZoomSupported(): Promise<any>;
  686. /**
  687. * is camera torch supported
  688. *
  689. * This method checks whether the camera flash function is supported.
  690. *
  691. * @returns Promise<{success, value}>
  692. */
  693. static isCameraTorchSupported(): Promise<any>;
  694. /**
  695. * is camera focus supported
  696. *
  697. * This method checks whether the camera mannual focus function is supported.
  698. *
  699. * @returns Promise<{success, value}>
  700. */
  701. static isCameraFocusSupported(): Promise<any>;
  702. /**
  703. * is camera exposure position supported
  704. *
  705. * This method checks whether the camera mannual exposure function is supported.
  706. *
  707. * @returns Promise<{success, value}>
  708. */
  709. static isCameraExposurePositionSupported(): Promise<any>;
  710. /**
  711. * is camera auto focus face mode supported
  712. *
  713. * This method checks whether the camera mannual auto-face focus function is supported.
  714. *
  715. * @returns Promise<{success, value}>
  716. */
  717. static isCameraAutoFocusFaceModeSupported(): Promise<any>;
  718. /**
  719. * set camera zoom ratio
  720. *
  721. * This method sets the camera zoom ratio.
  722. *
  723. * @param zoomFactor
  724. * @returns Promise<{success, value}>
  725. */
  726. static setCameraZoomFactor(zoomFactor: number): Promise<any>;
  727. /**
  728. * get camera max zoom ratio
  729. *
  730. * This method gets the camera maximum zoom ratio.
  731. *
  732. * @notice Android Only
  733. * @returns Promise<{success, value}>
  734. */
  735. static getCameraMaxZoomFactor(): Promise<any>;
  736. /**
  737. * set camera focus position in preview
  738. *
  739. * This method sets the mannual focus position.
  740. *
  741. * @param options {@link PositionOption}
  742. * @returns Promise<{success, value}>
  743. */
  744. static setCameraFocusPositionInPreview(options: PositionOption): Promise<any>;
  745. /**
  746. * set camera exposure position
  747. *
  748. * This method sets the mannual exposure position.
  749. *
  750. * @param options {@link PositionOption}
  751. * @returns Promise<{success, value}>
  752. */
  753. static setCameraExposurePosition(options: PositionOption): Promise<any>;
  754. /**
  755. * set camera torch on
  756. *
  757. * This method enables the camera flash function.
  758. *
  759. * @param enabled
  760. * @returns Promise<{success, value}>
  761. */
  762. static setCameraTorchOn(enabled: boolean): Promise<any>;
  763. /**
  764. * set enable auto focus face mode
  765. *
  766. * This method enables auto-focus face mode function.
  767. *
  768. * @param enabled boolean
  769. * @returns Promise<{success, value}>
  770. */
  771. static setCameraAutoFocusFaceModeEnabled(enabled: boolean): Promise<any>;
  772. /**
  773. * get call id
  774. *
  775. * This method is used to get call id.
  776. *
  777. * @returns Promise<{success, value}>
  778. */
  779. static getCallId(): Promise<any>;
  780. /**
  781. * set log file and log filter
  782. *
  783. * This method sets the log file generated path and specified the log level.
  784. *
  785. * @param filepath string
  786. * @param level enum
  787. * @param maxfileSize integer (KB)
  788. * @returns Promise<{success, value}>
  789. */
  790. static setLog(filepath: string, level: number, maxfileSize: number): Promise<any>;
  791. /**
  792. * send stream message
  793. *
  794. * This method sends stream message by specified uid
  795. *
  796. * @param uid
  797. * @param data
  798. * @returns Promise<{success, value}>
  799. */
  800. static sendMessage(streamID: number, data: any, reliable: boolean, ordered: boolean): Promise<any>;
  801. /**
  802. * add publish stream url
  803. *
  804. * This method add publish stream by option.
  805. *
  806. * @param options {@link PublishStreamOption}
  807. * @returns Promise<{success, value}>
  808. */
  809. static addPublishStreamUrl(options: PublishStreamOption): Promise<any>;
  810. /**
  811. * remove publish stream url
  812. *
  813. * This method remove publish stream by options.
  814. *
  815. * @param options {@link RemovePublishStreamOption}
  816. * @returns Promise<{success, value}>
  817. */
  818. static removePublishStreamUrl(options: RemovePublishStreamOption): Promise<any>;
  819. /**
  820. * set live transcoding
  821. *
  822. * This method sets the video layout and audio settings for CDN live.
  823. *
  824. * @param options {@link LiveTranscoding}
  825. * @returns Promise<{success, value}>
  826. */
  827. static setLiveTranscoding(options: LiveTranscodingOption): Promise<any>;
  828. /**
  829. * get sdk version
  830. *
  831. * This method gets the sdk version details and passed it into callback function
  832. *
  833. * @param callback to handle resolve from getSdkVersion
  834. * @param errorHandler to handle reject error from getSdkVersion
  835. */
  836. static getSdkVersion(callback: Callback<any>, errorHandler?: Callback<any>): any;
  837. /**
  838. * mute local audio stream
  839. *
  840. * This method sends/stops sending the local audio.
  841. *
  842. * @param enabled
  843. */
  844. static muteLocalAudioStream(enabled: boolean): void;
  845. /**
  846. * video pre-process/post-process
  847. *
  848. * This method enables/disables image enhancement and sets the options.
  849. *
  850. * @param enable boolean
  851. * @param options {@link BeautyOptions}
  852. * @returns Promise<{success, value}>
  853. */
  854. static setBeautyEffectOptions(enabled: boolean, options: BeautyOption): Promise<any>;
  855. /**
  856. * set local voice change
  857. *
  858. * This method changes local speaker voice with voiceChanger
  859. *
  860. * @param voiceChanger integer
  861. * @voiceChanger value ranges [
  862. * 0: "The original voice",
  863. * 1: "An old man’s voice",
  864. * 2: "A little boy’s voice.",
  865. * 3: "A little girl’s voice.",
  866. * 4: "TBD",
  867. * 5: "Ethereal vocal effects.",
  868. * 6: "Hulk’s voice."
  869. * ]
  870. * @returns Promise<{success, value}>
  871. */
  872. static setLocalVoiceChanger(voiceChanger: number): Promise<any>;
  873. /**
  874. * set the preset local voice reverberation effect.
  875. *
  876. * This method sets the preset local voice reverberation effect.
  877. *
  878. * @param preset integer
  879. * @returns Promise<{success, value}>
  880. */
  881. static setLocalVoiceReverbPreset(preset: number): Promise<any>;
  882. /**
  883. * control stereo panning for remote users
  884. *
  885. * This method enables/disables stereo panning for remote users.
  886. *
  887. * @param enabled boolean
  888. * @returns Promise<{success, value}>
  889. */
  890. static enableSoundPositionIndication(enabled: boolean): Promise<any>;
  891. /**
  892. * set the sound position of a remote user
  893. *
  894. * This method sets the sound position of a remote user by uid
  895. *
  896. * @param uid number | The ID of the remote user
  897. * @param pan float | The sound position of the remote user. The value ranges from -1.0 to 1.0
  898. * @pan
  899. * 0.0: the remote sound comes from the front.
  900. * -1.0: the remote sound comes from the left.
  901. * 1.0: the remote sound comes from the right.
  902. * @param gain float | Gain of the remote user. The value ranges from 0.0 to 100.0. The default value is 100.0 (the original gain of the remote user). The smaller the value, the less the gain.
  903. * @returns Promise<{success, value}>
  904. */
  905. static setRemoteVoicePosition(uid: number, pan: number, gain: number): Promise<any>;
  906. /**
  907. * start the lastmile probe test
  908. *
  909. * This method start the last-mile network probe test before joining a channel to get the uplink and downlink last-mile network statistics, including the bandwidth, packet loss, jitter, and round-trip time (RTT).
  910. *
  911. * @param config LastmileProbeConfig {@link LastmileProbeConfig}
  912. *
  913. * @event onLastmileQuality: the SDK triggers this callback within two seconds depending on the network conditions. This callback rates the network conditions with a score and is more closely linked to the user experience.
  914. * @event onLastmileProbeResult: the SDK triggers this callback within 30 seconds depending on the network conditions. This callback returns the real-time statistics of the network conditions and is more objective.
  915. * @returns Promise<{success, value}>
  916. */
  917. static startLastmileProbeTest(config: LastmileProbeConfig): Promise<any>;
  918. /**
  919. * stop the lastmile probe test
  920. *
  921. * This method stop the lastmile probe test.
  922. *
  923. * @returns Promise<{success, value}>
  924. */
  925. static stopLastmileProbeTest(): Promise<any>;
  926. /**
  927. * sets the priority of a remote user's media stream.
  928. *
  929. * note: Use this method with the setRemoteSubscribeFallbackOption method. If the fallback function is enabled for a subscribed stream, the SDK ensures the high-priority user gets the best possible stream quality.
  930. *
  931. * This method sets the priority of a remote user's media stream.
  932. * @param uid number
  933. * @param userPriority number | The value range is [50 is "user's priority is hgih", 100 is "the default user's priority is normal"]
  934. *
  935. * @returns Promise<{success, value}>
  936. */
  937. static setRemoteUserPriority(uid: number, userPrority: number): Promise<any>;
  938. /**
  939. * start an audio call test.
  940. *
  941. * note:
  942. * Call this method before joining a channel.
  943. * After calling this method, call the stopEchoTest method to end the test. Otherwise, the app cannot run the next echo test, or call the joinchannel method.
  944. * In the Live-broadcast profile, only a host can call this method.
  945. * This method will start an audio call test with interval parameter.
  946. * In the audio call test, you record your voice. If the recording plays back within the set time interval, the audio devices and the network connection are working properly.
  947. *
  948. * @param interval number
  949. *
  950. * @returns Promise<{success, value}>
  951. */
  952. static startEchoTestWithInterval(interval: number): Promise<any>;
  953. /**
  954. * set the camera capture preference.
  955. *
  956. * note:
  957. * For a video call or live broadcast, generally the SDK controls the camera output parameters. When the default camera capture settings do not meet special requirements or cause performance problems, we recommend using this method to set the camera capture preference:
  958. * If the resolution or frame rate of the captured raw video data are higher than those set by setVideoEncoderConfiguration, processing video frames requires extra CPU and RAM usage and degrades performance. We recommend setting config as CAPTURER_OUTPUT_PREFERENCE_PERFORMANCE(1) to avoid such problems.
  959. * If you do not need local video preview or are willing to sacrifice preview quality, we recommend setting config as CAPTURER_OUTPUT_PREFERENCE_PERFORMANCE(1) to optimize CPU and RAM usage.
  960. * If you want better quality for the local video preview, we recommend setting config as CAPTURER_OUTPUT_PREFERENCE_PREVIEW(2).
  961. *
  962. * This method will set the camera capture preference.
  963. *
  964. * @param config {@link CameraCapturerConfiguration}
  965. *
  966. * @returns Promise<{success, value}>
  967. */
  968. static setCameraCapturerConfiguration(config: CameraCapturerConfiguration): Promise<any>;
  969. }
  970. export default RtcEngine;